AUTONET TV

Oh, Stop! (Disc Brake Service)

Every time you drive your vehicle, you wear down your brakes just a little bit.  And after a while, that adds up.  Gradually, your stopping power isn't like it used to be.  Since brakes are one of your vehicle's most important safety features, it just makes sense to keep them performing well.

Most vehicles have disc brakes.  One key component, as the name suggests, is the disc.  Most vehicles have discs on their front and rear wheels.  The discs (also called rotors) are made of metal, and each rotates with the wheel hub.  Your brakes also have pads that make contact with the rotors when you press down on the brake pedal, and the friction stops your vehicle.

After many, many stops, that friction wears down both the pads and the discs and reduces their ability to stop the way you need them to.  The discs may also become uneven from all the heat they generate, and your brakes won't stop as well as they used to when they were newer. 

Some signs that your rotors need attention include vibration at the wheels when you stop, discolored rotors (the metal looks blue), excessively hot rotors, or grooves in the metal.  If you see any of these signs, it's time to bring in your vehicle for us to inspect your brakes. 

A technician will measure the thickness and trueness of the rotors and check the surfaces for wear.  If they need to be replaced, they'll be done in pairs, so if a front rotor is bad, the other front rotor will also be replaced. Usually, your brake pads will be replaced at the same time.  You can ask your service advisor if higher-performance brakes would benefit you.

When your vehicle is at the shop, the technician will check other components of your brake system to make sure they are operating safely. Brakes are vital to the safe operation of your vehicle.  Keep them well maintained so they can be there when you need them.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Command Performance (Engine Air Filter)

The internal combustion engine in your vehicle counts on two things that mix together to be burned in the engine for power: fuel and air.  Both are important, of course.  If you run out of fuel, your engine won’t run at all.  Since there’s plenty of air around, you won’t run out of air, but you could feel your vehicle’s performance suffer if the engine air filter starts to get clogged. 

It's important that the air that enters your engine be free of dirt, dust, and debris to prevent damage to internal components.  That’s where the engine air filter comes in.  It prevents those particles from entering the engine, an important job that most people just take for granted.

After a while, your air filter will get dirty, which results in less air reaching the engine.  Modern fuel injected engines can adjust the amount of gas to mix with the air that is getting in, so your fuel economy won’t change significantly.  What will change is how well the engine performs, its acceleration.  In one test, a US Department of Energy study showed that a dirty air filter reduced a vehicle’s get-up-and-go by as much as 11 percent.  

The company that made your vehicle includes guidelines in your owner’s manual on how frequently that filter should be changed, and doing so will maintain your engine’s performance. If you drive in dusty, dirty areas or those with a lot of industrial pollution, we recommend you replace the engine air filter more frequently than the manufacturer’s recommendations.  

When you bring your vehicle to us for regular maintenance, we will routinely check several components, including your engine air filter, and recommend a change when we see signs it’s needed. It’s good for your engine, and you’ll enjoy the performance you expect.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Hans Imports Brake Service for Safe Stopping in North Kingstown

Let's talk about something critical for all North Kingstown drivers: your brakes. Your vehicle is heavy, and it takes a lot of muscle to bring it and your passengers to a safe stop – so everything needs to be in good working order.

Here's an explanation on how your disc brakes work:

The wheel hub keeps your wheel attached to your vehicle. The brake disc – or rotor – is attached to the hub and rotates with the wheel as you drive around North Kingstown. Your brake pads clamp onto the rotor to slow the wheel.

The brake caliper straddles the rotor and squeezes the rotor to slow it down. The calipers contain brake pads which press on the rotor when you put your foot on the brake. The brake piston causes the calipers to squeeze and release as you use your vehicle brakes.

Your brake pads start to wear the first time you step on the brakes. Eventually the pads wear out and need to be replaced. If you don't replace the pads when they're worn out, the metal parts of the brake will grind against the rotor and carve grooves into the surface. We've all heard grinding brakes and it's not a pretty sound.

If a rotor isn't scored significantly, your friendly and knowledgeable Hans Imports technician can put it on a lathe and smooth it out. If the grooves are too deep or if the rotor is warped or cracked, you need to replace it.

Sometimes brake pistons can stick and must be replaced. Typically it's cheaper to replace the entire caliper at Hans Imports in North Kingstown than to rebuild the piston.

So there you have it – an important lesson on how your disc brakes work. If you replace brake pads on time, it will not only keep your vehicle stopping safely but could save you cash on unnecessary repairs down the road.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

The Last Gas (Fuel Pump Replacement).

You're heading down the road and you notice your vehicle is sputtering, like it's running out of gas.  But the gauge show's it's still got a quarter of a tank.  So what gives?

It could be that your fuel pump is failing, meaning your engine is not getting enough gas to run properly.  While fuel pumps are built to last a long time, sometimes they fail.  Other symptoms you may have a bad fuel pump include your vehicle stalling and then refusing to start again, the engine overheating or a hum or whirr coming from around the gas tank.  Or, your Check Engine light may come on.

Most fuel pumps are in the gas tank. They have a small electric motor in them.   When you bring your vehicle to our service center, a technician will run tests to confirm the fuel pump is getting power to it but has failed.  Some vehicles have an access panel so the fuel pump can be removed and replaced. 

But in some vehicles that don't have that access panel, the technician has to drain the fuel and take the tank out of the vehicle to be able to replace the fuel pump inside.  Some parts such as brackets that attach the pump can be reused when the new fuel pump is installed.  Most technicians will recommend replacing the fuel filter at the same time the fuel pump is changed out.

If the technician has to remove the fuel tank, they'll also check for rust and corrosion and replace any affected parts.

Keep one thing in mind - your vehicle's fuel pump is in the fuel tank because it's kept cool and lubricated by the gasoline in the tank.  Try not to let your fuel level go below a half or quarter of a tank to maximize the life of your fuel pump.  Also, try to use Top Tier gasoline that has higher standards than some other fuels.  Your engine—and fuel pump—will thank you.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net