AUTONET TV

Let?s Shift Gears (Transmission Fluid Replacement)

If you have a vehicle with an automatic transmission, you probably never think about gear shifting.  When motor vehicles were invented, all of them had to be shifted manually.  But that wonderful self-shifting transmission, referred to these days as simply an “automatic,” changed everything.

Automatic transmissions have a lot of moving parts, and they are bathed in a fluid that keeps them lubricated and cool. That fluid also is vital to the whole gear shifting process. 

As you might imagine, the longer that fluid does its job, the more chance it has to pick up some contaminants.  Sometimes a leak will spring up in an automatic transmission.  Dirty transmission fluid or not enough of it will both create problems. It may cause your Check Engine light to come on, or your transmission may run rough and make strange noises.

The best strategy is not to let it get to this point.  That means you should have your transmission fluid replaced at regular intervals. Your vehicle’s manufacturer recommends how often you should have your transmission fluid changed. You should also have the fluid checked at regular intervals to detect if any problems crop up before that recommended interval. They’ll check not only the level but also inspect its condition.

Keep in mind that most automatic transmission problems are caused by overheating. You can reduce your chances of transmission failure by making sure your transmission—and its fluid—is regularly inspected and the fluid is replaced when it needs to be.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

A Bumpy Ride (Strut Assembly Replacement)

If you’ve noticed your vehicle’s ride has lately been bumpy or you’re hearing strange noises when you drive over bumps, you may need new struts.   The strut assembly is part of your vehicle’s suspension system that’s used to absorb the irregularities on the surfaces you drive on.

You have probably heard of shocks or shock absorbers.  A shock is a piston with gas or liquid inside.  When you hit a bump, that shock absorbs the blow. Struts are similar to shocks but they also have a coil spring for extra strength.  They’re often used in the front of the vehicle because of the engine’s extra weight. 

As you might imagine, your struts take a beating every day.  Eventually, they will wear out, and your wheels and tires won’t stay connected to the road as well as they used to. In addition to a bumpier ride, you may notice your tires starting to wear with failing struts because those tires aren’t in contact with the road surface as evenly as they used to be. 

When you bring your vehicle in to us, we’ll run some tests to determine what’s going on and what condition your suspension components are in.  Your vehicle’s manufacturer recommends struts to be replaced at certain intervals, and it’s important to change them out with the same type of equipment.  They should always be replaced in pairs on the same axle. 

After your struts are replaced, your suspension should be aligned so everything is headed down the road in the right direction. After that, driving should be smooth sailing.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

The Best Book that's Not a Best-Seller

Sometimes the movie is better than the book, sometimes it's the other way around.  But when it comes to your vehicle, the best book of all is the owner's manual. The plot is simple: Owner wants long life and dependable performance from the vehicle, manual has the way to achieve that long life and dependable performance.

And yet, it's amazing that some people will own a vehicle for years and never even crack this book.  They'll only read it when they absolutely have to, for things like finding out how to change the clock. 

Ok, so you're probably not going to rush right over to your glove box and start reading the owner's manual cover to cover.  We know that.  But just think of what you can get out of it.

Consider this.  Those who wrote or helped write this book include the engineers who designed it and the people who tested and refined it.  They know more about your vehicle than anyone, period.  They know how long a part is likely to last and what you need to do to take care of it. They know how far a distance or how long a time you can drive before you have to change certain fluids in it.  They know what temperature it can reach before things will start to break.

And they've put your vehicle model through torture, testing it in the absolute worst conditions to see how to make it stand up to more abuse than it will ever receive.  They've then torn it down, examined it and, in many cases, redesigned the parts to make them even better. 

And they've put down—in fairly minute detail—this blueprint that, if you and our experts at Hans Imports follow their suggestions, will make it very likely that your vehicle will serve you well for a long time.  If you don't follow those suggestions, all bets are off.

We didn't even mention that the owner's manual tells you how to operate everything in your car.  How to adjust the heat and air conditioning, how to pair your smartphone with the audio system, how to program your key fob so it won't sound the horn when you lock your vehicle.

Have you lost your manual or did you buy a vehicle that didn't come with one?  Many are available either online or in paper form. If you don't know where to begin with such a long book, try a couple of pages a week, just three minutes.  You’ll discover your vehicle does things you never even knew it could do.  And the movie will never be as good.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Slipping into Fall (Driving with ABS Brakes)

As the weather changes over from hot to colder, drivers will have to deal with more slippery streets.  And it's important to know how to drive with the brakes you have on your vehicle. 

In the 1970s, anti-lock braking systems (ABS) started to be installed on vehicles and they've been a game changer for drivers.  Most modern vehicles have ABS and it's important to know how to drive with them.

In older vehicles without ABS, the driver applies the brakes by pushing down the pedal.  That, in turn, sends braking pressure to all four wheels at once.  But all four tires don't have the same traction because the road surface they're each on isn't exactly the same.

ABS allows sensors to determine when particular wheels are slowing down more quickly.  The ABS then reduces braking pressure to the wheels that are about to lock up.  That way the wheel turns and the tires keep some grip. (You have to have grip to stop.) It's kind of what drivers try to achieve when they pump the older-style brakes without ABS.

Another engineered feature of ABS is that it makes sure your front wheels will continue to rotate and maintain some traction.  That's important because the front wheels are used to steer, and being able to steer gives a driver more control in a quickly-changing situation.  So ABS is all about stopping as fast as the road surface will allow but at the same time enabling the driver to maintain control. 

ABS is designed for the driver to put steady pressure on the brake pedal and let the vehicle’s computerized system handle the braking.  Pumping the pedal in a vehicle with ABS can defeat what the system is trying to do to help you maintain control.

Because stopping techniques in a vehicle with ABS are different than those without, it’s important to know which brakes you have so you can operate them accordingly. 

If you have any doubt, consult your service advisor.  ABS involves sophisticated technology and must be maintained in order for it to work properly.  Your service advisor can recommend a maintenance schedule for you to follow so your ABS is always on the ready to help you stop when you need to.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net