AUTONET TV

The Right Stuff (Choosing Replacement Parts)

Let's face it.  Vehicles are complicated machines, each having thousands of parts.  And since they're subjected to heat, cold, vibrations, bumps and much more, these parts wear out and need to be replaced. 

When your service advisor says you need a new part, you may have many options.  Let's say you need a new muffler.  One choice would be to get exactly the same part that was installed when the vehicle was manufactured.  The advantages are that it will perform the same way as the one it's replacing and will likely last about the same amount of time as the original.

Some mufflers are made by the same companies that supplied the automaker when your vehicle was new (they call that an OEM part—Original Equipment Manufacturer).  And often those are the same as the part you'd buy from a dealer. A reputable vehicle service facility will know which ones these are because they replace mufflers all the time and do their homework.

The good news is there are many different mufflers available from several manufacturers.  These are called aftermarket parts. Some of them may use different metals or a different construction technique. Some may sound a little sportier while some may make your engine perform better.  Your service advisor will discuss what your driving habits are and help choose the part that's best for you.

You may be able to get a part that's better than the one originally installed.  Here's an example.  A repair shop discovered one owner's vehicle had developed cracks and leaks in the hoses that attach to the heater core.  They were made of plastic, and heat and pressure had caused the originals to crack.  The service advisor recommended they replace it with an aftermarket part that was made of aluminum instead, one that was more durable than the original part.

Some aftermarket parts cost more, some cost about the same or less.  Depending on how and where you drive and what you want out of your vehicle, you can decide to buy more economical parts which might be the best fit for your needs.  Or you may decide to upgrade to a better, more expensive part.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Braking Good (Brake Drum Replacement)

Maybe your vehicle feels like Breaking Bad.  In other words, when you brake, things are bad.  You may find it takes you a longer distance to stop, you feel a vibration, or it’s pulsating when you depress the brake pedal, or perhaps your vehicle pulls to one side.

Those can be symptoms of failing brake drums.  While a lot more vehicles these days have disc brakes, many vehicles still have brake drums, almost always in the rear wheels. The drum is a cast iron shallow cylinder that surrounds the other parts, including curved brake shoes that press pads against the drum to slow you down or stop the vehicle.

Any time you have things going wrong with your brakes, you should get them fixed soon.  Safely operating any vehicle depends on having the brakes be able to slow and stop you dependably.  It can make the difference between avoiding a collision and having one. 

When you bring your vehicle in, a technician will inspect your braking system. Depending on the wear, drum brakes can be resurfaced or replaced. Sometimes it’s cheaper to replace the drum than to resurface it.  It’s important for all the other brake system components to be inspected first and all worn parts replaced.  

Most of the time, when you have your drums resurfaced or replaced, the brake shoes should be replaced at the same time. You have brakes at each end of your axles, and the same brake service should be done at both ends so that both sides can have consistent, even stopping power. 

Your brakes can save your life.  If their braking power is bad, you owe it to yourself and others on the road to let us help make them good again.  Good and safe.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Passing the Test (How to Prevent Emissions Test Failure)

Vehicle emission testing has become ubiquitous in North America and for a good reason.  Clean air quality is important for the environment and all of us.  Since vehicle emissions are among the main causes of air pollution, emission testing can alert you to problems in your vehicle than can be fixed so it won't needlessly pollute.

Emissions tests are looking for certain toxic gases internal combustion engines produce, such as nitrogen oxide, particulate matter, non-methane organic gases and formaldehyde.  Emissions control systems reduce these gases if they are working properly. 

The best way to minimize pollution is to keep those vehicle systems working properly, and periodic inspection and maintenance is the key.  So if you want to make sure your vehicle will pass an emissions test, it helps to know what might go wrong.

Let's start on the easy one.  Your gas cap could be loose, allowing vapors to escape into the atmosphere.  The most common solution is to replace it.  Or your air filter may be dirty.  A dirty air filter may push your hydrocarbons pass the acceptable level.

Now to the more complicated things.  The mixture of fuel and air in your engine may be tilted toward the "too much fuel" side.  That could cause problems for your vehicle's catalytic converter, a device that converts toxic gases from your exhaust into less toxic pollutants.

Your vehicle has a closed system that prevents fuel tank vapors from escaping into the air; it's called the EVAP system.  A technician can track down problems.

Vehicle engineers have gone to great lengths to minimize the amount of pollution your vehicle produces.  Your vehicle's manufacturer recommends how frequently those systems need servicing.  Keep those systems in good shape and you're likely to pass emissions tests with flying colors.  Neglect them and you might find your vehicle failing an emissions test.  When that happens, you'll have to get the problems repaired before you can get back on the road.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net

Water Everywhere (Clogged Drains)

It's bad enough when you mistakenly leave a window open in your vehicle on a rainy day and you find your carpet soaked.  But what in the world is going on when your windows are closed tight, not leaking and you STILL wind up with wet carpet? The answer could be something you might not even know your vehicle has.

And the answer is? Drains. And those drains can get clogged.  Yes, your vehicle has several drains with tubes or hoses attached to them that you really never see.  There are some in and around the hood that channel rainwater down to the ground.  There are some that take condensation from the air conditioner and allow it to flow outside.  And if your vehicle has a retractable sunroof or moon roof, there are small drains at each corner that connect to tubes that go through the vehicle body down to an exit near the ground. 

Considering all the leaves, dirt, dust and other debris your vehicle encounters on a daily basis, it's not surprising that these drains can get blocked.  Then when it rains, that water winds up going to the place of least resistance.  Sometimes, that's inside the cabin where it shows up as wet carpeting.

So, what's the solution?  You may be tempted to see if you can clean out those drains yourself.  But there are many people who have tried blowing condensed air in the drains only to find that they literally blow the tubes off of their connections inside the vehicle's body.  Reattaching those can be a time-consuming, labor-intensive, expensive proposition.

A trained technician has the equipment and knowledge to clear out those drains properly. To prevent clogged drains, regular maintenance is the key, so when your vehicle is in for other periodic maintenance like oil changes and tire rotations, the technician can make sure all drains are clear and flowing like they should.

Hans Imports
7275 Post Rd
North Kingstown, RI 02852
(401) 295-7785
http://www.hansimports.net